Voor Renault Immo Emulator Module Startonderbreker Module EDC15C3 DCU3R MSA15 SiriuS32 Fenix5
For Renault Immo Immobiliser Emulator Module EDC15C3 DCU3R MSA15 SiriuS32 Fenix5
Immo pin code is not required
Decode the ecu using the renualt ecu decoder.
Only 3 wires to connect: Ignition, Ground and Data.
Small module size
Module is designed to be left permanently connected to the car.
Non-volatile memory means no data loss, even after flat batteries or jump startS.
Module can be used again if need be.
SIEMENS FENIX3B
SIEMENS FENIX5
SIEMENS SIRIUS32
SAGEM SAFIR (55pin)
SAGEM SAFIR2 (35pin)
for BOS CH. MOTRONIC MP7.0
MAGNETI MARELLI IAW 06R
MAGNETI MARELLI IAW 8R.30
Diesel ECU's
for BOS CH. MSA15.5 (DTI)
for BOS CH. EDC15C3 (DCI)
LUCAS DCU3R (1.9D)
Coded fuel cut-off valve (1.9D DDS)
Features:
1. Ensure that the ecu has been decoded. This can be done with the Renault ecu decoder
2. Connect the module to the car's wiring harness: Red wire to ignition feed, black wire to earth, and yellow wire to the data wire
3. Cut the wire to the immobilizer, so that the module is connected directly to the engine ECU, and the immobilizer is out of the circuit.
4. Turn ignition back on, the car should now start.
Package include:1x For Renault Immo Emulator
Item Weight : 0.5kg
Item Type : Auto Key Programmer
Model Name : Renault IMMO Emulator
Brand Name : ITCARDIAG
Electronic : No
Item Length : 8inch
Origin : Mainland China
Item Width : 10inch
External Testing Certification : ce
Item Height : 5inch
Material Type : Plastic