Features for the RC6GS V3(V2 Upgrade):
7 Channels
30 models memory storage
One switch to active the D/R setup
One switch to active the EPA setup
One switch to active different mix control
Timer function for racing and training
Low battery voltage of each model can be setup independently
Support headtracking /simulator /crossfire
Setting simplicity, Fast Response for 7 Channels, 30 Models Memory Storage, telemetry of Maximum 8S Vehicle Battery Voltage, Dual Mix Programmable Control, Cruise Control, USB upgrade firmware, Throttle Lock, Voltage Protection, ABS and fail-safe protection, 10 Subsidiary ID, outstanding long range up to 600 meters and more features. (Actual control distance is according the local environment)
RC6GS V3 is an ideal partner for all types RC cars and boats in the market including single-engine and twin-engine models such as Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting, Gasoline RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car and other types of RC cars or boats.
RC6GS V3 RC Remote Control Transmitter Features:
1.【Excellent Anti-interference】: Real pseudo random algorithm FHSS communication technology makes RC6GS V3 control distance up to 1900 feet (600 meters), and over 20 units of RC6GS V3 can work simultaneously at one place without any interference.
2.【Up to 600M Ground Distance】: The control distance is up to 600 meters under the superior anti-interference ability.
3.【30 Models Memory Storage】: Up to 30 models memory can be saved and each model can be set up and named separately.
4.【Dual Programmable Mix Control】: Mix control can be programmed with any two channels and each mix control can be turned on by one switch. That's friendly for twin-engine vehicles, such as tanks, boats, 4 wheel steering car.
5.【Throttle & Steering Dual Rate】: Support one switch to active the servo deviations.
6.【Two-way Transmission Return】: Real-time signal strength, RX battery voltage and vehicle battery voltage(telemetry of maximum 8S)can be displayed on the radio screen.(Only support works with radiolink R7FG or R8F receiver)
7.【Built in Gyro】: R7FG built-in gyro can keep the vehicle running in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
8.【Timer Function】: The timer allows you to grasp the lap and complete track results in time to help you train yourself before the race
9.【Customized Channels】: CH3-CH7 can be customized to VR, three-way switch and tact switch, the tact switch can be used for cruise control mode, a good idea for crawler, all channels' fail-safe values can be set to any value as you need.
10.【3 Advanced Entertainment Modes】: The DSC port support connect simulator, head tracking and TBS crossfire, will bring you more diverse experience.
11.【Reverse Polarity Protection】: Anti-polarity connect protection technology to keep your transmitter safety even if you Accidentally connect the wrong positive and negative poles. JST connector supports multiple batteries: liPo or 6*AA.(NOT INCLUDED)
RC6GS V3 Transmitter Specifications:
Channels: 7
Control Distance: Up to 600 meters
Model: RC Cars and Boats
Low Voltage Alert: Yes(Below 4.6V)
Operating Voltage: 4.8-15.0V DC
Operating Current: 80mAh-120mAh
Screen: 128*64 resolution, LCD back light
Spread Spectrum: FHSS
Antenna Length: 106mm
Frequency: 2.4GHz ISM band (2400MHz-2483.5MHz)
Battery compartments: 25*97*60mm (JST 2Pin connector)
Size: 22.4*17.5*11.6cm
Weight: 323g
Compatible Receivers: Radiolink R7FG/R6FG/R6F/R4FGM/R4F/R8EF/R8F
R7FG Receiver Specifications:
Channels: 7
Gyro inside: Yes
Control Distance: Over than 600 meters
Waterproof level: IPX4, water splash proof
Signal output: PPM/PWM/S-BUS, 2.4GHz
Receiver operating voltage: 3-12V
Modulation Mode: GFSK
Antenna Length: 200mm
RF Power: <10dbm
Channel resolution: 4096
Working Current: 30mA
Applicable model: rc car, boat
Size: 3.5*1.8*1.5cm
Weight: 6g
Package List:
RC6GS V3 radio x1
R7FG receiver x1
XT60 Telemetry cable x1
Neck lanyard x1
User manual x1
