+

(EU)DXF Lipo 2S 7.6V Battery 6300mAh 130C Shorty Lipo Graphene Racing Series HardCase For RC Truck Evader BX Truggy 1/10 Buggy

USD 73.50USD 350.00

(EU)DXF Lipo 2S 7.6V Battery 6300mAh 130C Shorty Lipo Graphene Racing Series HardCase For RC Truck Evader BX Truggy 1/10 Buggy

Description

(EU)DXF Lipo 2S 7.6V Battery 6300mAh 130C Shorty Lipo Graphene Racing Series HardCase For RC Truck Evader BX Truggy 1/10 Buggy

 

About DXF:

DXF is one battery brand of Shenzhen SKT Technology Co., LtdCompany founded in 2016, is a leading manufacturer of RC LiPo Battery based on Shenzhen China. DXF Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. All of DXF batteries comply with RoHS and CE quality testing standards.DXF only  use Grade A cell.  DXF which is the Fans hobbyking town.

 

Key Point:

- Stable automatic stacking technology enables single-cell capacities . - Higher capacity during heavy discharge. More than 90% at 100% C rate. - Fast charge capable, up to 5C on some batteries. - Longer Cycle Life, almost double that of standard lipoly technology.

- Friendly after-sales support and after-sales guarantee.

 

Parameter Description:

Model Number:DXF63002S-GRAPHENE Capacity :6300mAh Voltage:7.6V / 2-Cell / 2S2P Discharge Rate:130C Continual / 260C Burst Charge Rate:5C Max Size:25X47X138mm Weight :216g (Including wire and connector) Output Connector:Deans/T-5MM Balance Connector:JST / XH Remarks:N/A
 

Package Information:

 
2PCS 2S2P 7.6V 6300mah 130C Deans/T-5MM
 

Warm Reminder:

1. Before using it, please full charge it with specific lipo balance charger; 2. Charge lipo battery no more than 4.20V per cell. As for battery pack in series, Please choose balance charging mode or charge each cell respectively; 3. Charging temperature must range in 15-35 Celsius, reverse charging is prohibited; 4. The voltage difference between any two cells should be in 0.03V, or charge is advised to balance the voltages beforeusage; 5. Please make sure the cut-off voltage is not lower than 3.4V, we highly recommend not lower than 3.6V; 6. Never discharge battery with current over the designed maximum continuous discharging current. After over current discharge, the performance will be deteriorated and cycle life will be shortened, causing overheating and even welling ,breakage, internal short-circuited etc; 7. If the surface temperature exceeds 65 Celsius while functioning, the battery should be suspended using until it cool down to ambient temperature naturally. Higher temperature may result int battery swelling and performance; 8. Do regularly charge discharge for maintenance(about 1-3 times every 3 months),battery must stored at about 3.85v/cell; 9. Do store battery at a place with low-humidity and free from corrosive gas within the temperature ranged from -20 Celsius to +40 Celsius 10. Under any circumstances dis-assembly of battery is prohibited.

 

 

 

Specification

Brand Name : GTFDR

Recommend Age : 12+y

Origin : Mainland China

Use : Vehicles & Remote Control Toys

Material : EVA

+