2.Receiver
1)1-8 Toggle/Self-Lock: Press->On; Press again->Off
(Press key 1 to learn)
Press one button for one time is working/ON .press the same button again is stop/OFF. (press 1 ,1 relay works,press 1 again,1 relay stops working,2-8 works like this)
2)1-8 Latched/Inter-Lock: Press->On; Press other button->Off
(Press key 4 to learn)
Press one button is working/ON ,press another button is stop/OFF.(press 1,1 relay works,press 2,1 relay stops working,2 relay works,3-8 works like this)
3)1-8 Momentary/Jog: Press and hold->On; Release->Off
(Press key 2 to learn)
Keep pressing one button is working /ON. loosen your finger is stop/OFF.(press 1 and hold,1 relay works,release key 1,1 relay stops working,2-8 works like this)
4)1-4 Toggle 5-8 Momentary
(Press key 8 to learn)
(Original Setting is Toggle , Change it by yourself.)
Decode: Learning code,soldering code
Power Supply (Operating Voltage): AC 220V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Current:<=7ma
Sensitivity:-107 dBm
Operating Temperature:-40‘C ~ 80’C
Size:125 mm x 80 mm x 30 mm
Frequency:315 / 433 MHz
3.Learn code and Remove Code
Learn: input the 220V for the receiver,press the learning button then the LED indicator ON and loosen your finger.Then press the 1/2/4/8 key
(choose the function)
on the transmitter ,the indicator flashs 1 time,it means learning successfully.
Remove:keep pressing the learning button on the receiver about 8 seconds until the indicator turns off,it means the codes are cleared successfully.The receiver can store about 12pcs transmitters.
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
