1. Our Ceramic ball bearings spindle use4 pcs ceramic ball bearings.

2. Ceramic ball bearings areresistant to high temperatures and low heat, usually 3-5 degrees lower than steel ball bearings during using .

3. Ceramic ball bearings havelow friction,low noiseandlong service life.

4. If you want to use the spindle for aluminum, hard wood, then ceramic ball bearings better than steel ball bearings.

• Inverter Type: Huanyang 220v 1.5kw

• Input Voltage:220V(+/-15%) ,We also stock 380V(+/-15%), please contact us for item stock.

• Output Voltage:220vAC

• Input Frequency:48-63 Hz

• Output Frequency:0-400 Hz

• Input Phase:1 or 3 phase(Support 1 phase input, also support 3 phase input)

• Output Phase:3 phase

• Warranty:1 year from the date you purchased

• PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;

• Easy PLC function can realize 16 legs of speed and inverter control function;

• RS485 communication port, adopting standard international MODBUS main circuit control;

• With extremely strong anti-jamming capability

• Low output ratting torque0.5HZ-150%, low speed running ability;

• Carrier adjustable by 16KHZ, completely soundless working environment;

• Broad voltage working area, normal running in 304V-456V;

• Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;

• Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;

• With perfect error protection and short circuit starting protection capability;

• Dead-time compensation and auto torque slip compensation function, can realize 180% high torque output at low frequency 0.25Hz;

• Unique EMC design,can minimize inverter's pollution to power;

• Overall reinforcement layer to suit all kinds of harsh enviroment;

DO NOTset up the inverter by yourself if you don't know how to, or it will make both the spindle and inverter burn easily.

Please contact us, we have manuals, videos and pictures to help you.

Diameter:80mm

Features

Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth.

Cast aluminium fixture is much heavier than aluminium profile fixture.

Product Description

Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.

Usage

Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.

• Spindle working environment temperature is usually -10 ~ 40 .

• Before installing the first electric spindle axis head turned by hand, should feel flexible, non-blocking phenomenon.

• Spindle in the preservation and transportation, high-speed grease inside the bearing state will change, customers should be running at low speed for 30 minutes. 3000 rpm and then follow the poor increase, run 20 minutes each. Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter.(Because of high-speed grease inside the bearing state will change,when you get the spindle, maybe the noise sounds not normal.Please run it 30 minutes or even more, the noise will be normal.)

• Connect the inverter spindle, three-phase inverter power cord should be soldered in the plug 1 (U), 2 (V), 3 (W) feet, 4 feet for the ground. After the power is turned on, to observe whether the spindle rotation axis indicates the direction consistent. If inconsistency should be immediately shut down, replace the inverter and spindle connected two wires of three-phase power supply.

• During normal operation, air-cooled spindle often encounter the phenomenon of heat, always check whether the air-cooled spindle housing and duct clogging dust.If clogging dust, to promptly clean up. If you do not clean up, it is easily to make the spindle burned.

• Every day before using the spindle must be running at low speed for 15-20 minutes. Clamping the cutters to spindle, collet nuts ,collets,cutters must be clean enough. Shank inserted into the collet must be greater than 15mm.

• Water cooled spindleMUSTbe used with water pump. Otherwise the spindle will soon broken.

• AC spindle motorMUSTuse with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.

• When you use the spindle,the noise is not same as always,pleaseSTOPthe spindle at once. You may need to replace the spindle bearings.

Before shipping , we did the oil seal to avoid the rust during the long shipment. When you get the spindle, please clearing the oil seal before using. Thank you.

If you don't know how to set up the inverter or connect the spindle to inverter,please contact us. We will help you to set up it.